HOW TO REFILL LEXMARK PRINTER CARTRIDGES

If you have Lexmark printer and you are looking for a solution to refill the Lexmark printer cartridges then the below write up can help. In this article we will talk of right steps that will help you in refilling of the Lexmark printer cartridges. So, find out below how to refill Lexmark printer cartridges.

Step 1- Take out Lexmark cartridge- You need to begin by taking out Lexmark cartridge out of the printer.

Step 2- Use absorbent underlay- Once the cartridge has been removed it needs to be kept on a paper towel.

Step 3- Remove Label- In this step the label needs to be removed. This label can be located on the upper part of cartridge. For removal a cutter can be used.

Step 4- Locate filler opening- Once when the cutter has been successfully used and the label has been removed the filler opening and level chip is visible. The chip is responsible for controlling the fill level.

Step 5- Use the needle- The needle needs to be stabbed over the filler opening within the sponge. The cartridge is slowly filled with ink until little ink starts to drop from the filler.

Step 6- Extract ink- You need to extract 1-2 ml of ink as it is likely that the sponge does not hold extra ink and the ink starts to leak out of the cartridge.

Once all the above steps have been done then the cartridge gets refilled and can be placed back into the printer again. It is necessary to know that after every refilling the cartridge must be left for 15 minutes on an absorbent paper. Care must be taken and dripping cartridge should not be placed into the printer. Also the print head must be cleaned time and again with distilled water.

Important information related to cartridges- #

It is even necessary to note that printing must not be performed with completely empty cartridges. Instead small amount of ink must be refilled once in a while. This is done for avoiding the drying and clogging of nozzle. Also by performing the above step the sponge within the cartridge remains smooth.

So perform the above refilling steps and in case you are unable to perform refilling properly take the help of some expert.

Powered by BetterDocs

Leave a Reply

Your email address will not be published. Required fields are marked *

Skip to content