HOW TO FIX BROTHER PRINTER – ERROR 32

Call for Help Desk Support Number (833)-522-1003 #

The message “Print Unable 32” or “Machine Error 32” appears on LCD display during a density shutter malfunction error. This error is displayed on the Brother printers if paper or labels are stuck inside the printer or the drum unit. It is recommended by the manufacturer that you use only genuine drum units, toner, and cartridges. The company is not responsible for any damage that is caused by the usage of third-party accessories. Even if you don’t have genuine parts, you can go through the following steps to learn how to fix brother printer error 32.

Firstly, you will need to disassemble the printer to check the drum unit, toner, and cartridges to verify if there are any paper or labels stuck in them.

Follow the following steps to disassemble the printer: – #

  1. Turn of the device either by unplugging the device, switching off the main plug or pressing the power switch found on the right side of the machine.
  2. Next, on the front cover, you will find the “Release Button” above the brother logon. Pull it up and open the front cover.
  3. When you have opened the cover, you will be able to see the drum unit of the printer. Hold the green handle that has a black circle sticker with a white number 1 on it. Lift the drum unit and slide it out till it stops.
  4. There are gray lock levers which you need to release to the side. This will enable you to lift the front of the drum unit and take it out completely from the printer.

Powered by BetterDocs

Leave a Reply

Your email address will not be published. Required fields are marked *

Skip to content