HOW TO FIX BROTHER PRINTER ERROR AFTER REPLACE TONER

Table of Contents

Are you a loyal user of Brother Printer? Have been using this printer for years? Have you ever encountered an  error message ‘Replace Toner’ on the printer display immediately after installing a new toner cartridge? Or ever received this error when the printer has been running low on ink? If no, then you are lucky, and if yes, then you must have tried to diagnose the issue. In case, you receive the error message ‘Replace Toner on your Brother Printer in the future, do try these smart hacks on How To Fix Brother Printer Error after Replace Toner.

Hack 1: #

Open the front panel and press the clear button. The printer display will show: ‘Replace Drum’ with options 1. Yes 2. No. All you need to do is type *00 on the keypad and you will see a message ‘Accepted’ on the display. Now, close the front panel and check for the printer performance.

Hack 2: #

Enable continuous mode on Brother Printer. Did you know that the printer flashes the message to replace toner on its display when the supply of toner has reached a level where the print quality cannot be guaranteed? However, you do have an option to continue printing with the toner cartridge beyond its estimated print life by enabling “Continue Mode” on your Brother Printer. Press the GO button 7 times. All of the LEDs will flash twice, and the Ready LED will turn on. Continue mode is now enabled.

Powered by BetterDocs

Leave a Reply

Your email address will not be published. Required fields are marked *

Skip to content